X-Seal Universal Primer

High performance primer for X-Seal FR200 and PS800 sealant.

X-Seal Universal Primer is a single component high penetration primer for use with X-Seal FR200 joint sealant.

Also asked for as: X-Seal Primer.

Low viscosity
Penetrating
Enhances bond

Request a quote Data sheet

Pack we stock: 1 litre

How much you need.

The arithmetic uses X-Calibur's published consumption for X-Seal Universal Primer and the pack sizes we stock. Set your own wastage allowance.

You need

x 1 litre pack

Data sheet quantity: 1.33 litres
With 10% wastage: 1.47 litres

Send this to WhatsApp for a quote

The figures behind it.

X-Seal Universal Primer - 15m² per liter.
1 Liter of X-Seal Universal Primer is sufficient for approx. 225lm of 10mm joint.

Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current X-Calibur technical data sheet before ordering.

Application

Where it is used.

In X-Calibur's own words, from the technical data sheet.

01X-Seal FR200 and PS800 Sealant

Where it is not the right product.

Avoid excessive application
Do not smoke

Specification

Technical data.

DCL Green Building Regulations

Specific gravity: 1.00 ± 0.05
Touch dry: 10 minutes at 30C (86F)
Recoat time: 24 hours at 30C (86F)
Volatile organic content: VOC <400 g/L

Typical values as X-Calibur prints them. They are not a specification for your project: the current X-Calibur data sheet is.

On site

Packs, mixing and storage.

We stock: 1 litre
X-Calibur packaging: 1 liter packs
Storage: 12 months when stored below 30C (86F) under shade in a dry environment.

X-Calibur.

See them all

X-Seal Universal Primer in Tanzania

Tell us the area. We will quote the job.

Sahihi is an authorized X-Calibur distributor in Dar es Salaam. Send the quantity of X-Seal Universal Primer you need, or describe the job and we will work it out with you.

Send an enquiry