X-Shield FlexPruf
X-Calibur · 22 kg
X-Calibur · Waterproof coatingNo. 04 / 7
X-Shield FlexPruf
Waterproofing coat for wet areas.
X-Shield FlexPruf is a high performance, flexible elasto-cement coating used for waterproofing of concrete and masonry.
- Meets SCAQMD Rule 1113 & LEED VOC Limits
- Formaldehyde free
- Waterproof
- Highly flexible
- Bridges crack
- UV stable
- Can be used above and below grade
- Breathable
- Consumption
- 3.4 kg/m² in two coats
- Pack we stock
- 22 kg
Coverage calculator
How much you need.
The arithmetic uses X-Calibur's published consumption for X-Shield FlexPruf and the pack sizes we stock. Set your own wastage allowance.
You need
x 22 kg kit
- Data sheet quantity
- 68 kg
- With 10% wastage
- 74.8 kg
The figures behind it.
- 1L (1.7kg) per m²per coat
- Normal applications require 2 coats.
Normal applications require 2 coats.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current X-Calibur technical data sheet before ordering.
Application
Where it is used.
In X-Calibur's own words, from the technical data sheet.
- 01Wet area waterproofing
- 02Roof waterproofing
- 03Swimming pools
- 04Tile/stone waterproof backing
- 05Water tank coating
- 06Concrete protection
- 07Waterproofing protection layer
- 08Resurfacing
- 09Anti root membrane
Where it is not the right product.
- Do not add water to the mixed coating
- Do not apply to substrates that have free water on them
- Not suitable for use with acids
- Avoid excessive thickness as this could cause cracking
Specification
Technical data.
- SCAQMD Rule 1113
- LEED NC2009 IEQ 4.2
- ANSI A118.10
- BS 6920
- DCL Green Building Regulations
- Elongation
- >100%
- Tensile strength
- >1.5 MPa
- Crack bridgability
- >2mm
- Pull off strength
- >0.7 MPa
- Shear strength
- >3 MPa
- Reduction in chloride ion permeability
- 98%
- Water permeability
- > 10 bar
- Volatile organic content
- VOC = <50g/L
Typical values as X-Calibur prints them. They are not a specification for your project: the current X-Calibur data sheet is.
On site
Packs, mixing and storage.
- We stock
- 22 kg
- X-Calibur packaging
- 22kg kits
- Storage
- 12 months when stored below 35C (95F) under shade in a dry environment.
X-Shield FlexPruf in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized X-Calibur distributor in Dar es Salaam. Send the quantity of X-Shield FlexPruf you need, or describe the job and we will work it out with you.