Mapei · Authorized distributor, TanzaniaLine 04 / 05
Mapefloor resin flooring and coatings.
Epoxy and polyurethane floor systems, from a high build coating to a 6 mm polyurethane-cement mortar, with the primer, the finishes and the quartz they are built with.
- 9
- Products
- 8
- Data sheets
- 7
- Calculators
Hands on · Thickness gauge
A resin floor is a thickness.
Slide from a roll coat to six millimetres. The section redraws to scale and the system changes with it.
Section · 1 mm = 1 divisionTo scale
Thickness
- Consumption on the data sheet, kg/m²
- approx. 5.5
The line
9 products, one page each.
- 01
Epoxy floor coatingMapefloor FC 200 MEHigh build epoxy resin floor coating.Part A 22 kg · Part B 3.5 kg - 02
Self-levelling epoxy floorMapefloor I 300 SL METhree-component multi-purpose coloured epoxy formulate for self-levelling industrial floor coatings, 2 to 4 mm thick.Part A 17 kg · Part B 5 kg · Part C 25 kg - 03
Polyurethane-cement floorMapefloor CPU+/MFHigh-performance self-smoothing polyurethane cement mortar from 3 to 6 mm.Part A 2 kg x 2 · Part B 2.16 kg x 2 · Part C 20 kg · Mapecolor CPU+ 0.23 kg - 04
Polyurethane floor finishMapefloor Finish 415 MEAromatic polyurethane finish for car park floor systems.Part A 10 kg · Part B 2.5 kg - 05Polyurethane floor finishMapefloor Finish 450 METwo-component, aliphatic, elastic coloured polyurethane finish resistant to wear and UV rays.Part A 18.9 kg · Part B 3.6 kg
- 06
Polyurethane binderMapefloor PU 410Two-component, self-levelling polyurethane binder for multi-layer resin systems on concrete floors in car parks.Part A 16 kg · Part B 3.9 kg - 07
Epoxy primerPrimer SNTwo-component fillerized epoxy primer.Part A 16 kg · Part B 4 kg - 08Quartz sandQuarzo 0.5/1.2Kiln-dried quartz sand for resin floor systems.25 kg
- 09
Drinking water coatingMapecoat DW 25Two-component epoxy paint for anti-acid and non-toxic coatings on concrete surfaces, suitable for contact with drinking water.Part A 12 kg · Part B 3 kg
FAQs
Choosing from this line.
9 products, held in Dar es Salaam.
- Mapefloor FC 200 ME: epoxy floor coating
- Mapefloor I 300 SL ME: self-levelling epoxy floor
- Mapefloor CPU+/MF: polyurethane-cement floor
- Mapefloor Finish 415 ME: polyurethane floor finish
- Mapefloor Finish 450 ME: polyurethane floor finish
- Mapefloor PU 410: polyurethane binder
- Primer SN: epoxy primer
- Quarzo 0.5/1.2: quartz sand
- Mapecoat DW 25: drinking water coating
Mapefloor FC 200 ME is a high build epoxy coating applied in two coats.
- Mapefloor I 300 SL ME is a self-levelling epoxy, 2 to 4 mm thick
- Mapefloor CPU+/MF is a polyurethane cement mortar from 3 to 6 mm
Mapefloor Finish 450 ME is the aliphatic polyurethane finish, resistant to wear and UV rays.
- Mapefloor Finish 415 ME is aromatic
Data sheets are on each product page. Prices are quoted.
- 8 of 9 products carry Mapei's technical data sheet as a PDF
- 7 have a coverage calculator built on Mapei's consumption figures
- Send quantities by WhatsApp or the enquiry form for a written quotation
More Mapei
The other lines.
- 9 productsTile Adhesives, Grouts & CareCementitious adhesives from C1 to C2TE S1, cement and epoxy grouts, and the cleaners that finish a tiling job.
- 5 productsPrimers, Levelling & Wood FlooringWhat goes down before the floor finish: primers, self-levelling compounds and a wood-floor adhesive.
- 10 productsConcrete Repair, Grouts & AnchoringRepair mortars, flowable grouts, epoxy injection and bonding, rebar protection and chemical anchoring.
- 14 productsWaterproofingCementitious and liquid membranes, waterstops, joint tapes, sealants and a waterproofing admixture.
Mapei resin flooring & coatings in Tanzania
Send the specification. We will match the product.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the substrate, the area and the exposure, and you get a product recommendation and a written quotation.