Mapei · Polyurethane-cement floorNo. 27 / 47
Mapefloor CPU+/MF
High-performance self-smoothing polyurethane cement mortar from 3 to 6 mm.
High-performance self-smoothing polyurethane cement mortar from 3 to 6 mm
- Mapefloor CPU+/MF is mainly used to create smooth polyurethane-cement based systems
- As base layer for rough multi-layer systems (Mapefloor System CPU+/DP) for industrial floors
- Mapefloor CPU+/MF is typically used in the chemical and pharmaceutical, textile and tanning industries
- Canning in general, sugar refineries, dairies, wineries and beverage companies in general
- Meat and fish processing
- Production and storage areas of food companies in general
- Commercial and industrial kitchens
- Freezing rooms and wherever high mechanical and chemical spillages and contact to hot liquids resistances are requested
- Consumption
- 5.5 kg/m² at 3 mm
- Packs we stock
- Part A 2 kg x 2 · Part B 2.16 kg x 2 · Part C 20 kg · Mapecolor CPU+ 0.23 kg
- Colour
- Grey
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Mapefloor CPU+/MF and the pack sizes we stock. Set your own wastage allowance.
You need
121
kg of mixed product
- Data sheet quantity
- 110 kg
- With 10% wastage
- 121 kg
The figures behind it.
- As scratch coat 1 mm thickness: Mapefloor CPU+/MF: approx. 1.7 kg/m2
- Mapefloor CPU+/MF 3 mm: approx. 5.5 kg/m2
- Mapefloor CPU+/MF 4 mm: approx. 7 kg/m2
- Mapefloor CPU+/MF 6 mm: approx. 10 kg/m2
Only whole packs of components A, B, C and Mapecolor CPU+ are mixed. We work out the number of kits with your quotation.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Mapefloor CPU+/MF is mainly used to create smooth polyurethane-cement based systems
- 02As base layer for rough multi-layer systems (Mapefloor System CPU+/DP) for industrial floors
- 03Mapefloor CPU+/MF is typically used in the chemical and pharmaceutical, textile and tanning industries
- 04Canning in general, sugar refineries, dairies, wineries and beverage companies in general
- 05Meat and fish processing
- 06Production and storage areas of food companies in general
- 07Commercial and industrial kitchens
- 08Freezing rooms and wherever high mechanical and chemical spillages and contact to hot liquids resistances are requested
Where it is not the right product.
- Do not apply Mapefloor CPU+/MF on wet substrates or on concrete younger than 7 days
- Do not dilute Mapefloor CPU+/MF with solvents or water
- Do not apply Mapefloor CPU+/MF on dusty or crumbly substrates
- Do not apply Mapefloor CPU+/MF on substrates contaminated by oil, grease, or dirt in general
- Do not apply Mapefloor CPU+/MF on ceramic substrates or stone materials in general with no appropriate specific preparation of the laying surface
Specification
Technical data.
- EN 13813 · complies with the requirements according to EN 13813
- EN 13813 · AR0.5
- EN 13813 · C50
- EN 13813 · F15
- EN 13501-1 · BFL-s1
- EN 1504-2 · coating (C), according to PI, MC, PR, RC, IR principles
- EN 1504-9 · complies with the principles defined in EN 1504-9
- ISO 846 · Resistant to fungi and bacteria, certified according to ISO 846.
- ISO 4628-1 · Hygienic and sanitizable; certified according to ISO 4628-1 Riboflavin test for cleaning validation.
- EN 1186, EN 13130 and prCEN/TS 14234 · Complies with standards applied in the foodstuffs sector EN 1186, EN 13130 and prCEN/TS 14234
- Indoor Air Comfort Gold · Complies with all Indoor Air Comfort Gold emission requirements for indoor flooring systems
- HACCP · Fulfills HACCP requirements.
- Colour of the mix
- Grey, beige, red, green, ochre, blue, orange
- Mixing ratio
- 2xA / 2xB / 1xC / 2xMapecolor CPU+: 2x2.0 / 2x2.16 / 1x20 / 2x0.23
- Density of the mix
- 1700 kg/m3
- Pot life at +23°C
- 15 min
- Temperature of the surface
- From +10°C to +30°C
- Tack free
- 2-4 h
- Ready for traffic at 23°C
- Recoating: 12 h
- Ready for traffic at 23°C
- Light traffic: 24 h
- Complete hardening
- 4-5 days
- Shore D hardness after 28 days
- 83
- Slip resistance (EN 13036-4)
- Class I (wet indoor surfaces) Class II (dry indoor surfaces)
- Adhesion strength (EN 13892-8)
- ≥ 2 N/mm2
Typical values as Mapei prints them in data sheet edition 8990-11-2023-I en (IT). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- Part A 2 kg x 2 · Part B 2.16 kg x 2 · Part C 20 kg · Mapecolor CPU+ 0.23 kg
- Mapei packaging
- Mapefloor CPU+ Component A: 2 kg pack Mapefloor CPU+ Component B: 2.16 kg pack Mapefloor CPU+/MF Component C: 20 kg bag Mapecolor CPU+: 0.23 kg pack. Warning: Product consists of two packs of component A plus two packs of component B plus one sack of component C and two packs of Mapecolor CPU+.
- Mixing
- 2xA / 2xB / 1xC / 2xMapecolor CPU+: 2x2.0 / 2x2.16 / 1x20 / 2x0.23
- Storage
- 12 months in the original sealed packaging and kept in a dry and sheltered place at temperatures between +10°C and +30°C. Components A and B can be damaged by frost. Mapefloor CPU+/MF part C is sensitive to humidity.
Related products
Resin Flooring & Coatings.
Mapefloor CPU+/MF in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Mapefloor CPU+/MF you need, or describe the job and we will work it out with you.