Mapei · Polyurethane binderNo. 30 / 47
Mapefloor PU 410
Two-component, self-levelling polyurethane binder for multi-layer resin systems on concrete floors in car parks.
Two-component, self-levelling, polyurethane binder
- Mapefloor PU 410 is used as layer broadcast in excess with quartz sand in elastic and waterproof resin systems for floors of parking areas
- Mapefloor Parking System HE, for indoor and outdoor areas compliant with the requirements of class OS11a
- Mapefloor Parking System ID, for indoor areas compliant with the requirements of the class OS 13
- Consumption
- 1.0 kg/m² as a wearing layer
- Packs we stock
- Part A 16 kg · Part B 3.9 kg
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Mapefloor PU 410 and the pack sizes we stock. Set your own wastage allowance.
You need
x 19.9 kg unit (A 16 kg + B 3.9 kg)
- Data sheet quantity
- 20 kg
- With 10% wastage
- 22 kg
The figures behind it.
- Mapefloor PU 410 + (A + B + Mapecolor Paste): 1.0 kg/m²
- Quartz 0.25: 0.3 kg/m²
- Broadcast in excess with Quartz 0.5 or Quartz 0.9 or Quartz 1.2: 4.0 kg/m²
- Stir the component A, then add the content of the component B and approx. 7% by weight of Mapecolor Paste and briefly mix all together.
- Then add 30% by weight of Quartz 0.25 and mix with a suitable low-speed electric mixer (300-400 rpm) for at least 2 minutes until a homogeneous mixture is achieved.
Mapefloor PU 410 mixed with Mapecolor Paste. Quartz sand is separate: 0.3 kg/m² of Quartz 0.25 in the mix, then broadcast in excess at 4.0 kg/m².
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Mapefloor PU 410 is used as layer broadcast in excess with quartz sand in elastic and waterproof resin systems for floors of parking areas
- 02Mapefloor Parking System HE, for indoor and outdoor areas compliant with the requirements of class OS11a
- 03Mapefloor Parking System ID, for indoor areas compliant with the requirements of the class OS 13
Where it is not the right product.
- Do not apply Mapefloor PU 410 on cementitious substrates with a moisture content higher than 4% or with capillary rising damp
- Do not dilute Mapefloor PU 410 with solvents or water
- Do not apply Mapefloor PU 410 on dusty or crumbling substrates
- Do not apply Mapefloor PU 410 on substrates with oil or grease stains or stains in general
- Do not apply Mapefloor PU 410 on substrates that have not been treated with Primer SN, or with another specific primer, or that have not been prepared as specified
Specification
Technical data.
- EN 13813 · complies with the requirements according to EN 13813
- EN 13813 · ≥ B1.5
- EN 13813 · AR0.5
- EN 13813 · IR4
- EN 13501-1 · BFL-s1
- EN 1504-2 · coating (C) according to the PI, MC, PR and IR principles
- EN 1504-9 · complies with the principles defined in EN 1504-9
- EN 1062-7 · static at -10°C: Class A3
- EN 1062-7 · static at +23°C: Class A3
- EN 1062-7 · dynamic at -10°C: Class B2
- EN 1062-7 · Dynamic at +23°C: class B2
- Colour of mix
- neutral
- Mixing ratio by weight
- component A : component B = 16 : 3.9
- Density of mix
- 1,300 kg/m³
- Pot-life at +20°C
- 30 min.
- Application temperature (refers to the ambient, material and substrate)
- from +10°C to +30°C
- Dust dry
- 2-4 h
- Set to light foot traffic
- 24 hours
- Complete hardening time
- 7 days
- Elongation to break fillerized with 30% b.w. of Quartz 0.25 (7 days) (DIN 53505)
- 80%
- Shore A hardness fillerized with 30% b.w. of Quartz 0.25 (7 days) (DIN 53505)
- 90
- Tear strength fillerized with 30% b.w. of Quartz 0.25 (7 days) (DIN 53515)
- 27 N/mm
- Tensile strength fillerized with 30% b.w. of Quartz 0.25 (7 days) (DIN 53504)
- 6.5 N/mm²
Typical values as Mapei prints them in data sheet edition 2065-5-2026 en (IT). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- Part A 16 kg · Part B 3.9 kg
- Mapei packaging
- 19.9 kg units: component A = 16 kg; component B = 3.9 kg.
- Mixing
- component A : component B = 16 : 3.9
- Storage
- 12 months in its original sealed packaging, in a covered, dry place, at temperature between +10°C and +30°C. Protect from frost.
Mapefloor PU 410 in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Mapefloor PU 410 you need, or describe the job and we will work it out with you.