Mapei · Self-levelling epoxy floorNo. 26 / 47
Mapefloor I 300 SL ME
Three-component multi-purpose coloured epoxy formulate for self-levelling industrial floor coatings, 2 to 4 mm thick.
Three-component multi-purpose coloured epoxy formulate for industrial floor coatings from 1 to 4 mm thick.
- Coating floors in the chemical and pharmaceutical industries
- Coating floors in the foodstuffs industry
- Coating floors in laboratories, sterile rooms, and hospitals
- Coating floors in aseptic rooms
- Coating floors in mechanized warehouses
- Coating floors in shopping centers
- Coating floors in nuclear plants
- Consumption
- 3.7 kg/m² at 2 mm
- Packs we stock
- Part A 17 kg · Part B 5 kg · Part C 25 kg
- Colour
- Light grey
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Mapefloor I 300 SL ME and the pack sizes we stock. Set your own wastage allowance.
You need
x 47 kg kit (A 17 kg + B 5 kg + C 25 kg)
- Data sheet quantity
- 74 kg
- With 10% wastage
- 81.4 kg
The figures behind it.
- Mapefloor I300 SL ME: 3.7 kg/m².
- Primer SN (A+B) : 0.3 kg/m².
- The recommended total consumption of Mapefloor I 300 SL ME must be at least 2.5-3.5 kg/m2.
- Apply a kit of Primer SN (A+B) mixed by a straight trowel with 20% by weight of Quartz 0.5 then lightly broadcast with the same sand at a rate of 0.7-1.0 kg/m².
- 47 kg units will yield 25.4 liters of mixed materials.
Mapei's figure for an average thickness of 2 mm. Primer SN is a separate product.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Coating floors in the chemical and pharmaceutical industries
- 02Coating floors in the foodstuffs industry
- 03Coating floors in laboratories, sterile rooms, and hospitals
- 04Coating floors in aseptic rooms
- 05Coating floors in mechanized warehouses
- 06Coating floors in shopping centers
- 07Coating floors in nuclear plants
Where it is not the right product.
- Do not apply Mapefloor I 300 SL ME on damp substrates or on substrates with capillary rising damp
- Do not dilute Mapefloor I 300 SL ME with solvent or water
- Do not apply Mapefloor I 300 SL ME on dusty or crumbling substrates
- Do not apply Mapefloor I 300 SL ME on substrates with oil or grease stains or stains in general
- Do not apply Mapefloor I 300 SL ME on substrates that have not been treated with Primer SN or that have not been prepared as specified
Specification
Technical data.
- Colour of mix
- RAL colours
- Density of mix (kg/m³)
- 1.85
- Workability time at +20°C
- 35 min
- Application temperature
- from +8°C to +35°C (refers to the surroundings, material and substrate)
- Waiting time between coats: - on Primer SN with fully broadcast quartz sand
- min. 12 h; no maximum limit
- on Primer SN with a light broadcast of quartz sand
- min. 18 h; max. 24 h
- Hardening time: - dust dry
- 2-4 hours
- set to foot traffic
- approx. 24 hours.
- full hardening time
- approx. 7 days
- Compressive strength (ASTM C579-01) (N/mm²)
- 50
- Flexural strength (BS6319-3 ) (N/mm²)
- 28
- Abrasion resistance - Taber abrasion test (ASTM D4060- 1,000 g / 1,000 rev / CS17) (g): - after 7 days
- 58
Typical values as Mapei prints them in data sheet edition 6797-6-2019 (UAE). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- Part A 17 kg · Part B 5 kg · Part C 25 kg
- Mapei packaging
- 47 kg kits (component A = 17 kg; component B = 5 kg; component C = 25 kg).
- Storage
- The product must be+ stored in its original packaging in a dry place at a temperature of between +5°C and +35°C. Maximum 24 months.
Related products
Resin Flooring & Coatings.
Polyurethane-cement floorMapefloor CPU+/MFPart A 2 kg x 2 · Part B 2.16 kg x 2 · Part C 20 kg · Mapecolor CPU+ 0.23 kg
Polyurethane floor finishMapefloor Finish 415 MEPart A 10 kg · Part B 2.5 kg- Mapefloor Finish 450 MEPolyurethane floor finishMapefloor Finish 450 MEPart A 18.9 kg · Part B 3.6 kg
Polyurethane binderMapefloor PU 410Part A 16 kg · Part B 3.9 kg
Mapefloor I 300 SL ME in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Mapefloor I 300 SL ME you need, or describe the job and we will work it out with you.