X-Prime GP
X-Calibur · 18 litres
X-Calibur · Epoxy primerNo. 03 / 7
X-Prime GP
Primer for epoxy systems.
X-Prime GP is a high penetration primer
- Meets SCAQMD Rule 1113 & LEED VOC Limits
- Formaldehyde free
- High solids
- Penetrating
- Enhances bond
- Stops out gassing
- Damp tolerant
- Easy volume ratio 1:1
- Pack we stock
- 18 litres
Coverage calculator
How much you need.
The arithmetic uses X-Calibur's published consumption for X-Prime GP and the pack sizes we stock. Set your own wastage allowance.
You need
x 18 litre pack
- Data sheet quantity
- 2 litres
- With 10% wastage
- 2.2 litres
The figures behind it.
- 5m² per liter at 200 microns
- 10m² per liter at 100 microns
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current X-Calibur technical data sheet before ordering.
Application
Where it is used.
In X-Calibur's own words, from the technical data sheet.
- 01Epoxy coating and floor systems
Where it is not the right product.
- Will not accommodate movement cracks
- Avoid excessive application
Specification
Technical data.
- SCAQMD Rule 1113
- LEED NC2009 IEQ 4.2
- Volume solids
- 90%
- Specific gravity
- 1.0 ± 0.05
- Pot life
- 50 mins at 25C (77F)
- Touch dry
- 3 to 4 hours at 25C (77F)
- Recoat time
- 6 to 24 hours at 25C (77F)
- Volatile organic content
- VOC = <100 g/L
Typical values as X-Calibur prints them. They are not a specification for your project: the current X-Calibur data sheet is.
On site
Packs, mixing and storage.
- We stock
- 18 litres
- X-Calibur packaging
- 18, 40 and 400 liter packs
- Mixing
- X-Prime GP is a 1:1 volume ratio product.
- Storage
- 18 months when stored below 30C (86F) under shade in a dry environment.
X-Prime GP in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized X-Calibur distributor in Dar es Salaam. Send the quantity of X-Prime GP you need, or describe the job and we will work it out with you.