X-Seal PS800
X-Calibur · 4 litres
X-Calibur · Joint sealantNo. 05 / 7
X-Seal PS800
High performance polysulphide joint sealant, stocked in pouring grade.
X-Seal PS800 is a high performance polysulphide sealant for use in a variety of applications. It has excellent adhesion to most substrates and can be used in immersed conditions.
Also asked for as: X-Seal PG (pouring grade), X Seal PG.
- Meets SCAQMD Rule 1168 & LEED VOC Limits
- Formaldehyde free
- Can be used in immersed conditions
- Durable resilient seal
- High early movement accommodation
- Excellent application characteristics
- Can be used in contact with potable water
- Available in gun and pouring grades
- Consumption
- 2.7 m per litre for a 25 x 15 mm joint
- Pack we stock
- 4 litres
Coverage calculator
How much you need.
The arithmetic uses X-Calibur's published consumption for X-Seal PS800 and the pack sizes we stock. Set your own wastage allowance.
You need
x 4 litre pack
- Data sheet quantity
- 3,000 ml
- With 10% wastage
- 3,300 ml
The figures behind it.
- Litres per metre run
X-Calibur's guide to quantities is the joint's width times its depth: a 25 x 15 mm joint takes 0.37 litres per metre run.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current X-Calibur technical data sheet before ordering.
Application
Where it is used.
In X-Calibur's own words, from the technical data sheet.
- 01High movement joints
- 02General purpose joint sealing
- 03Highway structures
- 04Water retaining and excluding structures
- 05Basement cladding
- 06Floors
- 07Subways
Where it is not the right product.
- Do not part mix
- Do not use in contact with asphalt
- Do not expose to aggressive chemicals
Specification
Technical data.
- SCAQMD Rule 1168
- LEED NC2009 IEQ 4.1
- Estidama LBi-2.1
- British Standard BS 4254
- British Standard BS 6920
- DCL Green Building Regulations
- ASTM D1149 (Ozone Resistance)
- Movement accommodation (BS6093)
- Butt joints: 25%
- Movement accommodation (BS6093)
- Lap joints: 50%
- Application temperature
- 0 to 60C
- Pot life
- 2 hours at 35C
- Initial cure
- 24 hours at 25C
- Full cure
- 7 days at 25C
- Service temperature
- 35 to 120C
- Volatile organic content, pouring grade
- VOC = Pouring Grade - 42 g/L
- Volatile organic content, gun grade
- VOC = Gun Grade - 36 g/L
Typical values as X-Calibur prints them. They are not a specification for your project: the current X-Calibur data sheet is.
On site
Packs, mixing and storage.
- We stock
- 4 litres
- X-Calibur packaging
- Pouring grade: 4 liter pack comprising separate base and curing agent.
- Mixing
- Add the entire contents of Part A (curing agent) to Part B (base component)
- Storage
- 12 months when stored below 25°C under shade in a dry environment.
X-Seal PS800 in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized X-Calibur distributor in Dar es Salaam. Send the quantity of X-Seal PS800 you need, or describe the job and we will work it out with you.