X-Tech EpoxyFloor SL1
X-Calibur · 17 litres
X-Calibur · Self-levelling epoxy floorNo. 02 / 7
X-Tech EpoxyFloor SL1
Self-levelling epoxy floor at 1 mm.
X-Tech EpoxyFloor SL is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor.
Also asked for as: X-Tech EpoxyFloor SL (grade SL1, 1 to 1.5 mm), X Tech SL1.
- Meets SCAQMD Rule 1113 & LEED VOC Limits
- Formaldehyde free
- High impact and abrasion resistance
- Fast application
- Easy to clean finish
- Consumption
- 1 litre per m²
- Pack we stock
- 17 litres
- Colour
- RAL 7035
Coverage calculator
How much you need.
The arithmetic uses X-Calibur's published consumption for X-Tech EpoxyFloor SL1 and the pack sizes we stock. Set your own wastage allowance.
You need
x 17 litre pack
- Data sheet quantity
- 20 litres
- With 10% wastage
- 22 litres
The figures behind it.
- X-Tech EpoxyFloor SL1: 17m2 per 17L pack at 1mm
Grade SL1 is laid at 1 to 1.5 mm. The figure is for 1 mm.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current X-Calibur technical data sheet before ordering.
Application
Where it is used.
In X-Calibur's own words, from the technical data sheet.
- 01Food and beverage plants
- 02Pharmaceutical facilities
- 03Kitchens and laundries
- 04Hospitals
- 05Laboratories and clean rooms
- 06Chemical handling and processing areas
Where it is not the right product.
- Will change color when exposed to direct sunlight
- Do not use solvent to finish the surface
Specification
Technical data.
- SCAQMD Rule 1113
- LEED NC2009 IEQ 4.2
- FDA CFR 21 Section 175.300
- DCL Green Building Regulations
- Compressive strength (ASTM D695)
- >70MPa
- Compressive modulus (ASTM D695)
- >5000MPa
- Impact resistance (ASTM D2794)
- >5 Joules
- Abrasion resistance (ASTM D4060)
- <50 mg
- Application temperature range
- 5 to 35C
- Pot life at 25C
- 75 minutes
- Service temperature
- 0 to 60C
- Volatile organic content
- VOC = <10g/L
Typical values as X-Calibur prints them. They are not a specification for your project: the current X-Calibur data sheet is.
On site
Packs, mixing and storage.
- We stock
- 17 litres
- X-Calibur packaging
- X-Tech EpoxyFloor SL: 17 liter packs
- Storage
- 12 months when stored between 10 to 35C under shade in dry conditions.
X-Tech EpoxyFloor SL1 in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized X-Calibur distributor in Dar es Salaam. Send the quantity of X-Tech EpoxyFloor SL1 you need, or describe the job and we will work it out with you.