Back to X-Calibur

X-Prime GP2

X-Calibur · 18 litres

X-Calibur · Epoxy primerNo. 07 / 7

X-Prime GP2

General purpose primer for epoxy coating and floor systems.

X-Prime GP2 is a high penetration primer

  • Meets SCAQMD Rule 1113 & LEED VOC Limits
  • Formaldehyde free
  • High solids
  • Penetrating
  • Enhances bond
  • Stops out gassing
  • Damp tolerant
Pack we stock
18 litres

Related documentation

  • Technical data sheet

    2 pages · 418 KB · PDF

    DownloadOpen
  • Safety data sheet

    Sent by WhatsApp or email

    Request

X-Calibur's own document, unaltered, saved on 2026-11-07. X-Calibur revises its data sheets: ask us for the current edition before you specify.

Coverage calculator

The arithmetic uses X-Calibur's published consumption for X-Prime GP2 and the pack sizes we stock. Set your own wastage allowance.

m²
Application
%

You need

1

x 18 litre pack

Data sheet quantity
2 litres
With 10% wastage
2.2 litres
Send this to WhatsApp for a quote

The figures behind it.

  • 5m² per liter at 200 microns
  • 10m² per liter at 100 microns

Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current X-Calibur technical data sheet before ordering.

Application

In X-Calibur's own words, from the technical data sheet.

  1. 01Epoxy coating and floor systems

Where it is not the right product.

  • Will not accommodate movement cracks
  • Avoid excessive application

Specification

  • SCAQMD Rule 1113
  • LEED NC2009 IEQ 4.2
Volume solids
100%
Specific gravity
1.2 ± 0.05
Pot life
50 mins at 25C
Touch dry
3 to 4 hours at 25C
Recoat time
6 to 24 hours at 25C
Volatile organic content
VOC = <100 g/L

Typical values as X-Calibur prints them. They are not a specification for your project: the current X-Calibur data sheet is.

On site

Packs, mixing and storage.

We stock
18 litres
X-Calibur packaging
18, 40 and 400 liter packs
Mixing
Add the hardener ‘Part B’ into the base ‘Part A’ and mix using a slow speed drill (500 rpm)
Storage
18 months when stored below 30C under shade in a dry environment.

X-Prime GP2 in Tanzania

Tell us the area. We will quote the job.

Sahihi is an authorized X-Calibur distributor in Dar es Salaam. Send the quantity of X-Prime GP2 you need, or describe the job and we will work it out with you.