Mapei · Tile cleanerNo. 08 / 47
UltraCare Multicleaner
Concentrated neutral cleaner for daily cleaning and maintenance of surfaces, including marble and natural stones.
Concentrated neutral cleaner with a very high yield, ideal for daily cleaning and maintenance of surfaces, including marble and natural stones
- Marble, granite and all natural stones, perfect for use on polished natural stones that are sensitive to aggressive detergents
- Porcelain and ceramic tiles
- Concrete flooring
- Parquet with oil or paint finish
- Terrazzo and terracotta
- Quartz and marble agglomerates
- Flooring in LVT, linoleum, rubber and PVC
- Acrylic resin flooring created using Mapecoat TNS range
- Consumption
- About 1500 m² per litre, diluted 1:200
- Pack we stock
- 5 litres
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for UltraCare Multicleaner and the pack sizes we stock. Set your own wastage allowance.
You need
x 5 litre jerrycan
- Data sheet quantity
- 0.01 litres
- With 10% wastage
- 0.01 litres
The figures behind it.
- Diluted in a ratio of 1 : 200 with water, it is possible to clean approximately 1500 m² of surface area with a litre of UltraCare Multicleaner.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Marble, granite and all natural stones, perfect for use on polished natural stones that are sensitive to aggressive detergents
- 02Porcelain and ceramic tiles
- 03Concrete flooring
- 04Parquet with oil or paint finish
- 05Terrazzo and terracotta
- 06Quartz and marble agglomerates
- 07Flooring in LVT, linoleum, rubber and PVC
- 08Acrylic resin flooring created using Mapecoat TNS range
Where it is not the right product.
- Do not use UltraCare Multicleaner undiluted
- UltraCare Multicleaner on waxed surfaces can be used only diluted
- Use on methacrylate baths only when diluted
Specification
Technical data.
- Consistency
- liquid
- Colour
- transparent
- Density
- 1.00 g/cm³
- pH
- 8
- Recommended temperature range
- 0°C to +40°C
- Waiting time before rinsing
- 5 minutes
Typical values as Mapei prints them in data sheet edition 11005-7-2026 (UAE). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- 5 litres
- Mapei packaging
- UltraCare Multicleaner is available in 1- and 5-litre jerrycans.
- Mixing
- Dilute UltraCare Multicleaner with water in a ratio from 1 : 20 to 1 : 200 depending on the degree of concentration required and the level of dirt to be removed.
- Storage
- UltraCare Multicleaner, stored in the original packaging, has a storage time of 3 years.
Related products
Tile Adhesives, Grouts & Care.
UltraCare Multicleaner in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of UltraCare Multicleaner you need, or describe the job and we will work it out with you.