Mapei · Tile cleanerNo. 07 / 47
UltraCare HD Cleaner
Concentrated alkaline professional cleaner for deep cleaning and degreasing.
Concentrated high-performing professional alkaline detergent suitable for removing organic dirt and to undertake a deep clean of surfaces. It is also effective as a wax remover for water-based and metal-flake waxes
- It is an excellent product suitable for cleaning and removing colored stains, oil, organic dirt and traffic marks from dirty surfaces such as:
- Porcelain, ceramic, glass, unpolished natural stone, concrete, terracotta, terrazzo
- When used undiluted, it removes stains from porcelain tiles
- Thanks to its effective cleaning and degreasing action, it is ideal for the preparation of existing ceramic and stone material before installing "tile-on-tile", with a cementitious adhesive or before applying a cementitious levelling compound to ensure full adhesion and to avoid detachments
- It is ideal for restoring surfaces, including removing previous water-based and metallic wax treatments
- Consumption
- About 200 m² per litre, diluted 1:20
- Pack we stock
- 1 litre
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for UltraCare HD Cleaner and the pack sizes we stock. Set your own wastage allowance.
You need
x 1 litre jerrycan
- Data sheet quantity
- 0.1 litres
- With 10% wastage
- 0.11 litres
The figures behind it.
- With one litre of UltraCare HD Cleaner diluted at a 1:20 ratio with water, you can clean approximately 200 m2 of surface.
- Diluted at a 1:5 ratio with water coverage is approximately 30 m2 of surface area.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01It is an excellent product suitable for cleaning and removing colored stains, oil, organic dirt and traffic marks from dirty surfaces such as:
- 02Porcelain, ceramic, glass, unpolished natural stone, concrete, terracotta, terrazzo
- 03When used undiluted, it removes stains from porcelain tiles
- 04Thanks to its effective cleaning and degreasing action, it is ideal for the preparation of existing ceramic and stone material before installing "tile-on-tile", with a cementitious adhesive or before applying a cementitious levelling compound to ensure full adhesion and to avoid detachments
- 05It is ideal for restoring surfaces, including removing previous water-based and metallic wax treatments
Where it is not the right product.
- Never use UltraCare HD Cleaner on waxed surfaces, unless to remove their treatment, or surfaces treated with products that are not resistant to wax-removing detergents
- Do not use on wood or polished stone
- Can damage methacrylate surfaces
- Undertake a test when using on PVC, rubber and linoleum to check their compatibility with the colour and surface finish
Specification
Technical data.
- Consistency
- liquid
- Colour
- opalescent
- Density
- 1.10 g/cm³
- pH
- 11
- Recommended application temperature range
- 0°C to +40°C
- Waiting time before rinsing
- 5 minutes
Typical values as Mapei prints them in data sheet edition 11006-7-2026 (UAE). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- 1 litre
- Mapei packaging
- UltraCare HD Cleaner is available in 1 and 5 litre jerrycans.
- Mixing
- Use UltraCare HD Cleaner diluted with water at a 1:10 to 1:20 ratio for deep cleaning of surfaces.
- Storage
- UltraCare HD Cleaner stored in the original packaging has a storage time of 3 years.
Related products
Tile Adhesives, Grouts & Care.
UltraCare HD Cleaner in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of UltraCare HD Cleaner you need, or describe the job and we will work it out with you.