Mapei · Epoxy adhesiveNo. 15 / 47
Adesilex PG2 TG
Two-component thixotropic epoxy adhesive for bonding Mapeband, Mapeband TPE, hypalon and structural bonding.
Two-component thixotropic epoxy adhesive for bonding Mapeband, Mapeband TPE, hypalon and structural bonding
- Structural repair, bonding, and reinforcement of concrete elements, natural stone, mortar, and brick
- Structural reinforcement of beams and pillars by bonding steel (beton plaqué method) or composite material (e.g. Carboplate) plates to concrete
- Non-flexible structural bonding of precast concrete elements
- Sealing injectors and surface damage before injection of Epojet LV by the low-pressure pump
- Sealing large cracks and repairing joint corners in industrial flooring subject to traffic
- Waterproofing large-size joints by bonding TPE strips (e.g. Mapeband TPE) to concrete
- General reprofiling over large areas up to 3mm
- Filling pinholes prior to overcoating with epoxy and polyurethane flooring system
- Consumption
- 1.71 kg/m² per mm of thickness
- Pack we stock
- 6 kg set
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Adesilex PG2 TG and the pack sizes we stock. Set your own wastage allowance.
You need
x 6 kg kit (A 4.5 kg + B 1.5 kg)
- Data sheet quantity
- 68.4 kg
- With 10% wastage
- 75.2 kg
The figures behind it.
- 1.71 kg/m² per mm of thickness.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Structural repair, bonding, and reinforcement of concrete elements, natural stone, mortar, and brick
- 02Structural reinforcement of beams and pillars by bonding steel (beton plaqué method) or composite material (e.g. Carboplate) plates to concrete
- 03Non-flexible structural bonding of precast concrete elements
- 04Sealing injectors and surface damage before injection of Epojet LV by the low-pressure pump
- 05Sealing large cracks and repairing joint corners in industrial flooring subject to traffic
- 06Waterproofing large-size joints by bonding TPE strips (e.g. Mapeband TPE) to concrete
- 07General reprofiling over large areas up to 3mm
- 08Filling pinholes prior to overcoating with epoxy and polyurethane flooring system
Where it is not the right product.
- Do not use Adesilex PG2 TG for sealing flexible joints or joints subject to movement
- Do not use Adesilex PG2 TG for shrinkage joints between fresh and hardened concrete (use Eporip)
- Do not use Adesilex PG2 TG on wet surfaces
- Do not use Adesilex PG2 TG on dirty or crumbling surfaces
- Do not use Adesilex PG2 TG for bonding and grouting anti-acid ceramic tiles (use Kerapoxy)
Specification
Technical data.
- Mixing ratio
- component A : component B = 3 : 1
- Consistency of mix
- thixotropic paste
- Color of mix
- grey
- Mass density of mix (kg/L)
- 1.71
- Application temperature range
- from +25°C to +50°C
- Complete hardening time
- 7 days
- Pot life (preconditioning +50°C) (FIP Clause 5.1)
- 20 minutes
- Open time (at +25°C for 24 hours and 100% R.H.) (FIP Clause 5.2)
- > 60 minutes
- Shrinkage (at +50°C for 7 days) (%)
- 0.2
- Heat resistance
- approx. 85°C
- Compressive strength at +25°C (MPa): - 12 hours: - 24 hours: - 7 days
- 35 82 89
- Shear strength (at +25°C for 7 days) (MPa)
- 27
Typical values as Mapei prints them in data sheet edition 379-12-2022-I (UAE). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- 6 kg set
- Mapei packaging
- 6 kg kit (part A: 4.5 kg; part B: 1.5 kg).
- Mixing
- The mixing ratio is: - 3 parts by weight of part A; - 1 part by weight of part B.
- Storage
- 24 months in their original packaging. Store the product at temperatures not below +10°C.
Related products
Concrete Repair, Grouts & Anchoring.
Adesilex PG2 TG in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Adesilex PG2 TG you need, or describe the job and we will work it out with you.