Mapei · Self-levelling compoundNo. 14 / 47
Ultraplan Contract
Ultra-fast drying self-levelling smoothing compound for thicknesses from 1 to 10 mm per coat.
Self-levelling, ultra quickhardening smoothing compound for thicknesses from 1 to 10 mm per coat
- Ultraplan Contract, especially suitable for the large building site, is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10 mm on new or existing substrates, preparing them to receive all kinds of flooring where high resistance to loads and traffic is required
- Levelling concrete slabs and cementitious screeds or Topcem or Topcem Pronto based screeds
- Levelling anhydrite substrates
- Levelling over underfloor heating systems
- Levelling existing concrete pavements, terrazzo, ceramic and natural stone floors
- Consumption
- 1.7 kg/m² per mm of thickness
- Pack we stock
- 25 kg
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Ultraplan Contract and the pack sizes we stock. Set your own wastage allowance.
You need
x 25 kg bag
- Data sheet quantity
- 102 kg
- With 10% wastage
- 112 kg
The figures behind it.
- 1.7 kg/m² per mm of thickness.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Ultraplan Contract, especially suitable for the large building site, is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10 mm on new or existing substrates, preparing them to receive all kinds of flooring where high resistance to loads and traffic is required
- 02Levelling concrete slabs and cementitious screeds or Topcem or Topcem Pronto based screeds
- 03Levelling anhydrite substrates
- 04Levelling over underfloor heating systems
- 05Levelling existing concrete pavements, terrazzo, ceramic and natural stone floors
Where it is not the right product.
- Do not use Ultraplan Contract for exterior applications
- Do not use Ultraplan Contract on substrates subject to continuous rising damp
- Do not apply Ultraplan Contract at temperatures below +5°C
- Do not apply Ultraplan Contract in thicknesses less than 3 mm when wooden flooring needs to be installed
Specification
Technical data.
- EMICODE · EC1 Plus
- Consistency
- fine powder
- Colour
- grey
- Mixing ratio (with water)
- 20-21%, - 5-5.25 L per bag
- Thickness per coat
- 1-10 mm per coat
- Density of mix
- 2000-2150 kg/m³
- Application temperature range
- from +5°C to +40°C
- Pot life
- 20-35 min
- Set to Light Foot Traffic
- min. 3 h
- Waiting time before application of the covering: - Ceramic tiles
- min. 3 h
- Resilient and wood flooring
- min. 24 h
- Compressive strength: - after 1 day: - after 7 days: - after 28 days
- 12 MPa 20 MPa 30 MPa
- Flexural strength: - after 1 day: - after 7 days: - after 28 days
- 3 MPa 5 MPa 6 MPa
Typical values as Mapei prints them in data sheet edition 4085-2-2023 (UAE). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- 25 kg
- Mapei packaging
- Ultraplan Contract is available in 25 kg bags.
- Mixing
- While mixing with a low-speed mixer, pour in a container containing 5-5.25 L (20-21%) of clean water a 25 kg bag of Ultraplan Contract to obtain a homogeneous, lump-free mix.
- Storage
- Ultraplan Contract in its original unopened packaging and in a dry place, can be stored for 12 months.
Related products
Primers, Levelling & Wood Flooring.
Ultraplan Contract in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Ultraplan Contract you need, or describe the job and we will work it out with you.