Mapei · Repair mortarNo. 19 / 47
Mapegrout T60 ME
Thixotropic, sulphate and chloride resistant, fibre-reinforced structural repair mortar.
- Repairs to both new and old concrete structures or reinforced concrete elements subject to aggressive atmospheric conditions including chloride and sulphate attack
- Reinstatement of cover to reinforcing steel and re-establishing structural integrity
- Repairs and reinstatement of manholes, sewerage structures and other utilities
- Repairs to industrial facilities including oil and gas, marine and other structures operating under extreme working environments
- Water retaining and excluding structures, tunnels and canal linings
- Filling of rigid joints (between base and column, cracks in floors, joints between walls, etc.)
- Repair of precast concrete elements
- Consumption
- 12.6 litres of mix per 25 kg bag
- Pack we stock
- 25 kg
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Mapegrout T60 ME and the pack sizes we stock. Set your own wastage allowance.
You need
x 25 kg bag
- Data sheet quantity
- 1,000 litres
- With 10% wastage
- 1,100 litres
The figures behind it.
- 12.6 litres / 25 kg
- Application Litres of water per 25 kg Trowel 3.75-4.25 Spray 4.00-4.50
- 100 parts of Mapegrout T60 ME with15 parts of water (approx. 3.75-4.25 l per 25 kg bags) and 0.25% of Mapecure SRA (one 0.25 kg bottle for 4 bags of Mapegrout T60 ME)
- For improved open-air curing of the mortar, it is recommended to add Mapecure SRA at the end of the mixing phase at a dosage of 0.25% by weight of the mortar (0.25 kg to every 100 kg of Mapegrout T60 ME).
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Repairs to both new and old concrete structures or reinforced concrete elements subject to aggressive atmospheric conditions including chloride and sulphate attack
- 02Reinstatement of cover to reinforcing steel and re-establishing structural integrity
- 03Repairs and reinstatement of manholes, sewerage structures and other utilities
- 04Repairs to industrial facilities including oil and gas, marine and other structures operating under extreme working environments
- 05Water retaining and excluding structures, tunnels and canal linings
- 06Filling of rigid joints (between base and column, cracks in floors, joints between walls, etc.)
- 07Repair of precast concrete elements
Where it is not the right product.
- Do not use Mapegrout T60 ME on smooth surfaces, roughen the surface and add rebars where necessary
- Do not add cement or admixtures to Mapegrout T60 ME
- Do not pour Mapegrout T60 ME into forms (use Mapegrout ME 06 or Mapegrout ME 05)
- Do not use Mapegrout T60 ME for anchoring (use Mapefill GP ME, Mapefill SP ME or Planigrout 300 range)
- Do not use damaged or previously opened bags of Mapegrout T60 ME
Specification
Technical data.
- EN 1504-3 · R4
- EN 1504-9 · meets the requirements defined by EN 1504-9
- Color
- grey
- Maximum size of aggregate (mm)
- 2.5
- Mixing Ratio
- 100 parts of Mapegrout T60 ME with15 parts of water (approx. 3.75-4.25 l per 25 kg bags) and 0.25% of Mapecure SRA (one 0.25 kg bottle for 4 bags of Mapegrout T60 ME)
- Consistency of mix
- thixotropic
- Density of mix (kg/m³)
- 2280
- Application temperature
- from +5°C to +50°C
- Pot life of mix
- ca. 1 hour
- Waiting time between each layer
- max 1-2 hours
- Compressive strength (MPa)
- > 20 (after 24 hours) > 50 (after 7 days) > 60 (after 28 days)
- Flexural strength (MPa)
- > 5 (after 24 hours) > 6 (after 7 days) > 8 (after 28 days)
- Bond strength on concrete (substrate in MC 0.40 - water/cement ratio = 0.40) according to EN 1766 (MPa)
- >2
- Drying shrinkage according to ASTM C157-93 (mad)
- < 500 microstrain
Typical values as Mapei prints them in data sheet edition 4086-10-2015 (UAE). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- 25 kg
- Mapei packaging
- 25 kg bags.
- Mixing
- 100 parts of Mapegrout T60 ME with15 parts of water (approx. 3.75-4.25 l per 25 kg bags) and 0.25% of Mapecure SRA (one 0.25 kg bottle for 4 bags of Mapegrout T60 ME)
- Storage
- When stored in dry conditions in the original, unopened bags, Mapegrout T60 ME has a shelf life of 12 months. If stored at high temperature and/or high humidity conditions the shelf life may be reduced.
Related products
Concrete Repair, Grouts & Anchoring.
Mapegrout T60 ME in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Mapegrout T60 ME you need, or describe the job and we will work it out with you.