Mapei · Cementitious membraneNo. 38 / 47
Mapelastic Easy
Two-component acrylic modified cementitious, flexible waterproof coating for balconies, terraces and bathrooms.
Two-component acrylic modified cementitious, flexible waterproof coating easy to apply for waterproofing balconies, terraces, and bathrooms
- Mapelastic Easy is used for waterproofing wet areas, balconies, and terraces
- Waterproofing bathrooms, showers, balconies, terraces etc., before laying ceramic tiles
- Waterproofing plasterboard, render or cementitious surfaces
- Consumption
- About 1.9 kg/m² per mm by trowel or roller
- Packs we stock
- Part A 18 kg · Part B 6 kg
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Mapelastic Easy and the pack sizes we stock. Set your own wastage allowance.
You need
x 24 kg kit (A 18 kg + B 6 kg)
- Data sheet quantity
- 76 kg
- With 10% wastage
- 83.6 kg
The figures behind it.
- Application by trowel or roller: Approx. 1.9 kg/m² per mm of thickness.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Mapelastic Easy is used for waterproofing wet areas, balconies, and terraces
- 02Waterproofing bathrooms, showers, balconies, terraces etc., before laying ceramic tiles
- 03Waterproofing plasterboard, render or cementitious surfaces
Where it is not the right product.
- Do not apply Mapelastic Easy at temperatures lower than +8°C
- Do not add cement, aggregates, or water to Mapelastic Easy
- Protect from rain and water spillages for the first 24 hours after application
- Do not apply on lightweight substrates
- Do not apply on cementitious substrates not sufficiently cured
Specification
Technical data.
- EN 14891 · in compliance with the requirements of EN 14891
- Mixing ratio
- component A : component B = 3 : 1 (one 18 kg bag of component A with an 6 kg can of component B)
- Thickness applied
- Final thickness at least 2 mm (See product application section)
- Application temperature range
- Surrounding and substrate temperature from +8°C to +40°C
- Pot life of mix
- approx. 2 hours (at +20°C)
- Colour of the mix
- light grey
- Density of the mix
- 1925 kg/m³
- Water impermeability - penetration depth
- Nil
- Impermeability to water, expressed as capillary absorption
- <0.1 kg/m2h0.5
- Initial adhesion
- ≥ 1.5 N/mm²
- Crack-bridging ability at 23°C
- ≥ 0.75 mm
- Mapelastic Easy must be applied in
- at least two coats by brush, trowel or with a roller within 60 minutes of it being mixed, to give a final required thickness
- After applying Mapelastic Easy
- wait at least 5 days for curing before laying ceramic tiles
Typical values as Mapei prints them in data sheet edition 7559-2-2023 (UAE). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- Part A 18 kg · Part B 6 kg
- Mapei packaging
- Mapelastic Easy available in 24 kg kits. Component A: 18 kg bags Component B: 6 kg jerrycans
- Mixing
- component A : component B = 3 : 1 (one 18 kg bag of component A with an 6 kg can of component B)
- Storage
- Mapelastic Easy component A may be stored for up to 12 months when contained in its original sealed packaging in a dry place. Mapelastic Easy component B may be stored for up to 24 months. Store Mapelastic Easy in a dry place and at a temperature of at least +5°C.
Mapelastic Easy in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Mapelastic Easy you need, or describe the job and we will work it out with you.