Back to Waterproofing
Mapei Mapeband TPE, joint tape: the pack
Mapei's own picture. The pack we stock: 170 mm x 30 m roll.

Mapei · Joint tapeNo. 42 / 47

Mapeband TPE

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement.

TPE tape for flexible sealing and waterproofing expansion joints and over cracks subject to movement

  • Waterproofing expansion joints in road-works, tunnels, hydraulic works and covering areas subject to movement up to 5 or 10 mm, using Mapeband TPE 170 or Mapeband TPE 325 respectively
  • Flexible waterproofing seal of expansion joints subject to large amounts of movement in service
  • Flexible waterproofing seals in tunnels, road-works, etc
  • Sealing expansion joints in prefabricated panels
  • Sealing structural joints in façades
  • Sealing joints in hydraulic works, such as channels, basins, drains, pipe-work, etc
  • Waterproofing joints in road-works
  • Waterproofing expansion joints in flat covering layers (under tiles or using suitable protection such as a metallic profile)
Pack we stock
170 mm x 30 m roll

Related documentation

  • Technical data sheet

    Edition 2033-3-2022-I-en · 6 pages · 2.5 MB · PDF

    DownloadOpen
  • Safety data sheet

    Sent by WhatsApp or email

    Request

Mapei's own document, unaltered, saved on 2026-11-05. Mapei revises its data sheets: ask us for the current edition before you specify.

Coverage calculator

The arithmetic uses Mapei's published consumption for Mapeband TPE and the pack sizes we stock. Set your own wastage allowance.

m
%

You need

2

x 30 m roll, 17 cm wide

Data sheet quantity
30 m
With 10% wastage
33 m
Send this to WhatsApp for a quote

The figures behind it.

  • Butt joints between two strips of Mapeband TPE must be carried out by overlapping and bonding at least 5 cm of the central part in TPE by either hot-welding or cold-welding, as illustrated previously.

Butt joints between two strips overlap by at least 5 cm. Add your overlaps to the length, or use the wastage field.

Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.

Application

In Mapei's own words, from the technical data sheet.

  1. 01Waterproofing expansion joints in road-works, tunnels, hydraulic works and covering areas subject to movement up to 5 or 10 mm, using Mapeband TPE 170 or Mapeband TPE 325 respectively
  2. 02Flexible waterproofing seal of expansion joints subject to large amounts of movement in service
  3. 03Flexible waterproofing seals in tunnels, road-works, etc
  4. 04Sealing expansion joints in prefabricated panels
  5. 05Sealing structural joints in façades
  6. 06Sealing joints in hydraulic works, such as channels, basins, drains, pipe-work, etc
  7. 07Waterproofing joints in road-works
  8. 08Waterproofing expansion joints in flat covering layers (under tiles or using suitable protection such as a metallic profile)

Where it is not the right product.

  • Do not use Mapeband TPE if it will come into contact with mineral oil, petrol or strong solvents (ketones, esters and hydrocarbons)
  • Do not lay Mapeband TPE on surfaces which are not perfectly clean, dry or which are irregular
  • In case of permanent contact with liquids at high temperature it is advisable to previously evaluate the application of the product and consult MAPEI Tehcnical Service Department

Specification

  • EN 13501-1 · Reaction to fire (EN 13501-1) (Euroclass): E
Colour
grey
Sizes available
17 cm (Mapeband TPE 170) 32.5 cm (Mapeband TPE 325)
Width of expansion area (mm)
Mapeband TPE 170: 50
Width of expansion area (mm)
Mapeband TPE 325: 165
Thickness (EN 1849-2) (mm)
1.2
Breaking load (EN 12311-2) (N/mm²)
> 4.5
Elongation at break (EN 12311-2) (%)
> 500
Low-temperature bending (EN 495-5) (°C)
< -30
Waterproofing level (EN 1928-B) (bar)
6
Resistance to temperature
from -20°C to +50°C
Maximum elongation of expansion zone (mm)
Mapeband TPE 170: 5
Maximum elongation of expansion zone (mm)
Mapeband TPE 325: 10

Typical values as Mapei prints them in data sheet edition 2033-3-2022-I-en. They are not a specification for your project: the current Mapei data sheet is.

On site

Packs, mixing and storage.

We stock
170 mm x 30 m roll
Mapei packaging
Mapeband TPE is supplied in boxes and is available in two sizes: Mapeband TPE 170 (width 17 cm): 30 m x 17 cm rolls; Mapeband TPE 325 (width 32.5 cm): 30 m x 32.5 cm rolls.

Mapeband TPE in Tanzania

Tell us the area. We will quote the job.

Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Mapeband TPE you need, or describe the job and we will work it out with you.