Mapei · Joint tapeNo. 43 / 47
Mapeband Easy
Rubber tape embedded between two layers of non-woven fabric to form elastic joints in waterproofing systems.
Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems
- Waterproofing corners between adjacent walls and between walls and floors
- Waterproof elastic control joints on terraces, balconies, pools, etc
- Pack we stock
- 130 mm x 30 m roll
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Mapeband Easy and the pack sizes we stock. Set your own wastage allowance.
You need
x 30 m roll, 130 mm wide
- Data sheet quantity
- 30 m
- With 10% wastage
- 33 m
The figures behind it.
- Joints between different pieces of Mapeband Easy must overlap at least 5 cm and be bonded with the chosen waterproofing product.
Joints between pieces overlap by at least 5 cm. Add your overlaps to the length, or use the wastage field.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Waterproofing corners between adjacent walls and between walls and floors
- 02Waterproof elastic control joints on terraces, balconies, pools, etc
Specification
Technical data.
- EMICODE · EC1 Plus - very low emission
- Type of material
- rubber sandwiched between two layers of non-woven polypropylene fabric
- Thickness (EN 1849-2) (mm)
- 0.68
- Weight (EN 1849-2) (g/m²)
- 285
- Tensile strength (EN ISO 527-3) (N/15 mm)
- 45
- Elongation at failure (EN ISO 527-1) (%)
- 315
- EMICODE
- EC1 Plus - very low emission
Typical values as Mapei prints them in data sheet edition 7631-03-I-2026 en (IT). They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- 130 mm x 30 m roll
- Mapei packaging
- 30 m long by 130 mm wide rolls. 10 m long by 130 mm wide rolls. 90° and 270° angular pieces. Templates to make through holes (200 x 200 mm and 400 x 400 mm).
Mapeband Easy in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Mapeband Easy you need, or describe the job and we will work it out with you.