Mapei · Reinforcing meshNo. 44 / 47
Mapenet 150
Alkali-resistant fibre glass mesh used to reinforce waterproof protection layers, antifracture membranes and external thermal insulation systems.
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems
- Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic used for waterproofing terraces, balconies, swimming pools, baths, shower cubicles, etc. with ceramic tile or stone finishes
- Protective, flexible smoothing layers of Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic applied on internal and external cementitious substrates with micro cracks
- Products of the Plastimul range when applied on substrates with micro cracks
- Cementitious skim coats in general
- Pack we stock
- 1 m x 50 m roll
Coverage calculator
How much you need.
The arithmetic uses Mapei's published consumption for Mapenet 150 and the pack sizes we stock. Set your own wastage allowance.
You need
x 50 m roll, 1 m wide
- Data sheet quantity
- 20 m²
- With 10% wastage
- 22 m²
The figures behind it.
- Overlap each piece of Mapenet 150 by at least 5 cm.
Each piece overlaps the next by at least 5 cm. Use the wastage field to allow for overlaps.
Consumption on site depends on the substrate, the tool and the applicator, which is why wastage is yours to set. The result is a quantity to plan and quote with, not a guarantee of coverage. Confirm the system against the current Mapei technical data sheet before ordering.
Application
Where it is used.
In Mapei's own words, from the technical data sheet.
- 01Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic used for waterproofing terraces, balconies, swimming pools, baths, shower cubicles, etc. with ceramic tile or stone finishes
- 02Protective, flexible smoothing layers of Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic applied on internal and external cementitious substrates with micro cracks
- 03Products of the Plastimul range when applied on substrates with micro cracks
- 04Cementitious skim coats in general
Specification
Technical data.
- ETAG 004 · in compliance with the ETAG 004 guide
- ETAG 004, paragraph 5.6.7.1 · The mesh is made of glass fibres treated with a special coating that provides resistance to alkalis (as specified in ETAG 004, paragraph 5.6.7.1).
- Colour
- blue
- Weight (g/m²)
- 150
- Mesh size (mm)
- 4 x 4.5
- Resistant to alkalis
- yes (according to ETAG 004 test, paragraph 5.6.7.1)
- Breaking strength of mesh (ETAG 004 CI.5.6.7.1.1)
- warp > 32 N/mm (1600 N/5 cm) weft > 32 N/mm (1600 N/5 cm)
- Breaking strength after ageing alkaline solution (ETAG 004 CI 5.6.7.1.2)
- warp ≥ 20 N/mm (1000 N/5 cm) weft ≥ 20 N/mm (1000 N/5 cm), always > 50% of the value as is
Typical values as Mapei prints them in data sheet edition 914-5-2023-I-gb. They are not a specification for your project: the current Mapei data sheet is.
On site
Packs, mixing and storage.
- We stock
- 1 m x 50 m roll
- Mapei packaging
- 50 metre rolls, 1 m wide.
- Storage
- The product may be stored for limitless time if stored in a clean and dry place.
Mapenet 150 in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Mapei distributor in Dar es Salaam. Send the quantity of Mapenet 150 you need, or describe the job and we will work it out with you.