Back to CMCI

Monokote Z-156T

CMCI · Bag

CMCI · Ultra high density fireproofingNo. 03 / 8

Monokote Z-156T

Ultra high density cementitious fireproofing for severe environmental exposure.

Z-156T is a Portland cement-based, factory-mixed material requiring only the addition of water on the job for application. It is spray applied, providing up to 4 hours of fire resistance.

Also asked for as: Monokote Z156, Z-156.

  • Factory pre-mixed
  • Corrosion inhibition
  • Moisture resistant
  • Durable
  • Weatherable
Pack we stock
Bag

What it is for

Fire protection for structural steel.

Compare bare steel with coated steel: turn up the fire and watch the difference. Monokote Z-156T's own limits are on its data sheet.

Fire rated cement, explained
Bare steelCoated steel
An illustration of the idea, not a fire test.

Related documentation

  • Technical data sheet

    2 pages · 944 KB · PDF

    DownloadOpen
  • Safety data sheet

    Sent by WhatsApp or email

    Request

The manufacturer's own document, unaltered. The manufacturer revises its data sheets: ask us for the current edition before you specify.

Application

In the words of the technical data sheet.

  1. 01Roadway tunnels
  2. 02Exterior environments where a highly durable fireproofing is required and a threat of steel corrosion is present

Specification

  • Up to 4 hours in accordance with the Rijkswaterstaat (RWS) fire curve
  • Up to 4 hours in accordance with UL 1709 hydrocarbon test
  • Jet fire testing in accordance with HSE standard OTI 95 634
  • Up to 4 hours in accordance with UL263 (ASTM E119)
  • Investigated by UL for exterior use
Dry density (ASTM E 605)
Min. 50 pcf (800 kg/m³)
Bond strength (ASTM E 736)
Min. 10,000 psf (478 kN/m²)
Compressive strength at 10% deformation (ASTM E 761)
850 psi (5.86 MPa)
Hardness (ASTM D 2240)
40
Minimum air and substrate temperature
40°F (4.5°C)
Color
Natural concrete gray

Values as the technical data sheet prints them. They are not a specification for your project: the current data sheet and the tested fire design are.

On site

Packs, mixing and storage.

We stock
Bag
Mixing
a mixer density of 65 to 70 pcf (1040 to 1120 kg/m3)
Storage
The material should be kept dry until ready for use.

Monokote Z-156T in Tanzania

Tell us the area. We will quote the job.

Sahihi supplies the CMCI range in Dar es Salaam. Send the quantity of Monokote Z-156T you need, or describe the job and we will work it out with you.