Monokote Z-106
CMCI · Bag
CMCI · Medium density fireproofingNo. 06 / 8
Monokote Z-106
Medium density fireproofing, spray applied to structural steel and steel decking.
Type Z-106 is spray applied directly to structural steel (beams and columns) and steel decking, providing up to 4 hours of fire resistance.
Also asked for as: Monokote Z106.
- Factory Pre-Mixed: Ready to use. No job site proportioning required
- Re-Spray: Type Z-106 is UL Classified for use with post-removal lock down encapsulates on columns, beams and galvanized fluted deck
- Moisture Resistant: The Portland cement base affords excellent fire protection characteristics in areas subjected to high humidity
- Durability: Its hardness and durability help resist accidental physical damage
- Pack we stock
- Bag
What it is for
Fire protection for structural steel.
Compare bare steel with coated steel: turn up the fire and watch the difference. Monokote Z-106's own limits are on its data sheet.
Fire rated cement, explainedApplication
Where it is used.
In the words of the technical data sheet.
- 01Parking garages
- 02Mechanical rooms
- 03Elevator shafts
- 04Swimming pool areas
Specification
Technical data.
- ASTM E 605
- ASTM E 736
- ASTM E 761
- ASTM E 84
- Dry density
- 352 kg/m3 (22 pcf)
- Bond strength, minimum average
- 4,882 kg/m² (1000 psf)
- Air erosion
- 0.000 gm/m² (0.000 gm/ft²)
- Compressive strength at 10% deformation
- 0.48 Mpa (70 psi)
- Hardness (Shore D)
- 10
- Surface burning, flame spread
- 0
- Surface burning, smoke developed
- 0
- Minimum air substrate temperature
- 4.4°C (40°F)
- Color
- Grey/beige
Values as the technical data sheet prints them. They are not a specification for your project: the current data sheet and the tested fire design are.
On site
Packs, mixing and storage.
- We stock
- Bag
- Mixing
- a mixer density of 610-690 kg/m3 (38-43 pcf)
Monokote Z-106 in Tanzania
Tell us the area. We will quote the job.
Sahihi supplies the CMCI range in Dar es Salaam. Send the quantity of Monokote Z-106 you need, or describe the job and we will work it out with you.