Oriental Yuhong · HDPE pre-applied waterproofing membraneNo. 02 / 6
PMH-3080 Plus
Pre-applied high density polyethylene (HDPE) waterproofing membrane for foundation slabs, tunnels and subways.
PMH-3080 Plus is a pre-applied high density polyethylene (HDPE) waterproofing membrane. It consists of a thick HDPE film, pressure sensitive adhesive and weather resistance granular layer.
Also asked for as: HDPE membrane, pre-applied membrane, PMH 3080, PMH3080.
- Unaffected by ground settlement
- Easy application & reduced installation time
- No lateral migration of water
- Can be applied to permanent formwork, allows maximum use of confined sites
- High puncture resistance, trafficable immediately after application
- Efficient process and environmentally friendly, cold apply, no primer
- Resistant to methane and radon gases
- Consumption
- Rolls of 24 or 48 m², or customized
- Pack we stock
- Roll, 1.2 m or 2.4 m wide, 20 m long
PMH-3080 Plus, pulled apart.
A labelled diagram, not to scale.
The layers, top to bottom
The sanded face the concrete is poured onto.
Related documentation
- DownloadOpen
Technical data sheet
Edition April 2026 · 4 pages · 190 KB · PDF
- Request
Safety data sheet
Sent by WhatsApp or email
Oriental Yuhong's own document, unaltered, saved on 2026-11-07. Oriental Yuhong revises its data sheets: ask us for the current edition before you specify.
Application
Where it is used.
In Oriental Yuhong's own words, from the technical data sheet.
- 01Foundation slabs of underground structures
- 02Tunnels
- 03Subways
Specification
Technical data.
- ASTM D412
- ASTM E154
- ASTM D903
- ASTM D5385
- ASTM D1876
- ASTM C1305
- ASTM D1970
- Thickness (mm)
- 1.2, 1.5
- Width (m)
- 1.2, 2.4
- Length (m)
- 20 or Customized
- Roll size (m2/roll)
- 24,48 or Customized
- Tensile strength (ASTM D412)
- 21 MPa
- Elongation (ASTM D412)
- 500%
- Puncture resistance (ASTM E154)
- 1000 N
- Peel adhesion to concrete (ASTM D903)
- 1800N/m
- Resistance to hydrostatic head (ASTM D5385)
- 71 m
- Peel strength in lap (ASTM D1876)
- 1800N/m
- Crack cycling at -23 C, 100 cycles (ASTM C1305)
- No crack
Typical values as Oriental Yuhong prints them in data sheet edition April 2026. They are not a specification for your project: the current Oriental Yuhong data sheet is.
On site
Packs, mixing and storage.
- We stock
- Roll, 1.2 m or 2.4 m wide, 20 m long
- Oriental Yuhong packaging
- Roll
- Mixing
- The membrane can be directly applied on "not fully cured concrete" or damp substrates without standing water.
PMH-3080 Plus in Tanzania
Tell us the area. We will quote the job.
Sahihi is an authorized Oriental Yuhong distributor in Dar es Salaam. Send the quantity of PMH-3080 Plus you need, or describe the job and we will work it out with you.